If you're in Plano or elsewhere in Collin or Dallas County and water is spreading across a floor right now, the next hour matters. A burst pipe, a line that froze and split after a hard freeze, a water heater that failed, or a supply line that let go — the source can be different, but the first steps are the same: stop more water from coming in if you can do it safely, protect people and belongings, and get a mitigation crew on the way. This is a practical first-hour guide, not a claim that every floor can be saved, and not a substitute for a professional dry-out.
Why the first hour matters in North Texas
In Collin and Dallas County, winter is when we hear from a lot of homeowners about pipe bursts. A hard freeze can split a pipe in an uninsulated garage, an attic, or along an exterior wall. You might not notice until you hear running water, see a ceiling stain, or step onto a wet carpet. The longer standing water sits, the farther it can wick into carpet pad, sub-floor, baseboards, and walls. That's why water damage is a 24/7 service for us. We average about 45 minutes to arrive in our Collin and Dallas County service area, not a guarantee. Traffic and distance can change that.
1. Shut off the water if it's safe
If the leak is still running, stopping the source is the most useful thing you can do. If you know which fixture or appliance is leaking, use that shut-off valve — under a sink, at the water heater, or at the washing machine or dishwasher. If you can't find a local valve, or more than one area is wet, shut off the main. In many Plano and North Texas homes, the main valve is near the water meter at the street, on an exterior wall, or in a garage or utility closet. Turn it clockwise until it stops. Don't crawl into an attic or into standing water to reach a valve if it doesn't feel safe. If you can't find the shut-off, say so when you call.
2. Be careful with power
Water and electricity don't mix. If water is near outlets, appliances, or a breaker panel, stay out of that area. If you can reach the breaker panel from a dry place, cut power to the affected rooms. Don't stand in water to unplug something or flip a breaker. If the panel itself is wet, or you're not sure, leave the power alone and wait for help.
3. Move belongings out of the wet area
Once the water is off and you're not walking through a live electrical hazard, move what you can lift safely — furniture, area rugs, electronics, and important documents — into a dry room. Don't drag heavy, soaked pieces across wet carpet. If you can't move a piece, lift the feet onto blocks or foil so wet carpet isn't pressed against the wood. Keep kids and pets out of the wet rooms.
4. Don't use a household vacuum on standing water
A regular household vacuum is not the right tool for this. It isn't built to pick up standing water, it can ruin the motor, and it can create a shock hazard. Leave the water for a truck-mounted extraction system. Don't turn the heat way up hoping the house will just dry out on its own. Right now, the goal is to stop the source and get extraction started.
5. Take photos for your records
Before you move too much, take photos and a short video of the source if you can see it, and of each wet room, including baseboards and any ceiling or wall stains. Photograph the shut-off if you used it, and anything that's already damaged. These photos are for your own records, and to share with your insurance company if you decide to file a claim. Coverage depends on your policy; your insurer makes that call. The claim itself is between you and your carrier.
6. Then call us — (469) 268-1916, 24/7
When the water is off, or you've done what you can safely, call or text (469) 268-1916. Water damage is a 24/7 service. You don't have to wait until morning, and you don't have to fill out a form while water is still sitting. Tell us your address in Plano or elsewhere in Collin or Dallas County, what you think is leaking, whether the water is shut off, whether water is near outlets, and about how much floor is wet. We'll tell you how we can help and when we can get there. We average about 45 minutes to arrive in our Collin and Dallas County service area, not a guarantee.
Online booking is available for scheduled work, but it is next-day at the earliest, with a 1-hour arrival window. For an active leak, calling is the faster path. You can also read our water damage page for how mitigation works, and our FAQ for common questions about pricing, process, and what to expect.
What we do when we arrive
This isn't a routine carpet cleaning visit. Mitigation means extracting standing water, then drying the structure with air movers and commercial dehumidifiers, and checking moisture so we're not just guessing that a floor "feels dry." Every loss is different, so water damage is quoted on inspection. You approve the written scope and price before we start. No deposit. You pay when the job's done.
We handle burst and frozen pipes, slab leaks, appliance overflows, and storm or roof-leak flooding in our Collin and Dallas County service area. We do not handle sewage. If that's what you're dealing with, we'll say so and point you toward a more appropriate service. Keep people and pets out of the wet area while you wait, and don't pull up soaked carpet or pad on your own unless someone has told you to.
If you're in Plano, Frisco, Allen, McKinney, Richardson, or elsewhere in our Collin and Dallas County service area, start with a call: (469) 268-1916. The first hour is about stopping the water, staying safe, and getting help on the way.
